3-1/2" constant diameter mandrel bent with larger radius bends
Combine with Banks Monster Ram Gen 2 for maximum power
More air allows for more fuel which means more horsepower
Over 73% larger flow area vs stock (3.5in vs 2.75in) (103% larger if you count the OEM dent)
4- and 5-ply heavy-duty silicone couplers
Spring-loaded constant tension clamps
Greater cooling capacity
Perfect fit and finish
Lower EGTs
About This Product
Increase flow area up to 103% over the stock 2-3/4" boost tubes with Banks' huge 3-1/2" OEM left and right side boost tubes. Stock hot side tube is dented at the factory, bringing it's diameter down to a tiny 2-1/4". Banks boost tubes are 3-1/2" constant diameter mandrel bent with larger radius bends. More air allows for more fuel which means more horsepower.
Fitment Note
This kit is designed to work with stock elbow or new Banks Monster-Ram (3.5" or 4") and the stock intercooler (or aftermarket intercooler with stock inlet and outlet size and location).
Specifications
Banks hot and cold side tubes have up to 103% greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat or natural finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots.
Looking for the ultimate flow increase? Banks Boost-Tubes are larger than the factory pipe and designed to work with not only the stock elbow but also the new Banks Monster-Ram Gen 2 which will improve airflow, and allow the turbocharger to spool up even faster.
Why It's Better
Banks hot side Boost-Tube has 103% greater flow area than OEM hot side when counting the OEM dent in the tube. Banks cold side has 67% greater flow area than OEM cold side.
Better flowing intercooler tubes results in less boost pressure loss allowing for more air and fuel to be delivered to your engine resulting in maximum horsepower. Replace your stock 2-3/4" boost tubes with Banks' huge 3-1/2" OEM left and right side boost tubes.
This kit is designed to work with the stock intercooler (or aftermarket intercooler with stock inlet and outlet size and location).
